Methods for Determining Quality Characteristics Wool Fibers

Authors

  • Valieva Z. F Tashkent Institute of Textile and Light Industry
  • Sa'dullayev Sh. D Tashkent Institute of Textile and Light Industry

DOI:

https://doi.org/10.51699/cajitmf.v7i1.1153

Keywords:

wool, average diameter, projection microscope, Air-Flow device, OFDA device, LASERSCAN, AIR-FLOW

Abstract

This article presents the distinctive characteristics of methods for determining an important qualitative characteristic of wool fibers such as fineness, which determines the different industrial purposes of wool and is the basis for differences in spinning ability.

References

N. T. Razgonov, “Problems of sheep wool quality and its certification,” CyberLeninka, 2026, [Online]. Available: https://cyberleninka.ru/article/n/problemy-kachestva-ovechiey-shersti-i-eyo-sertifikatsiya

Z. F. Valieva, S. A. Khamraeva, and E. T. Laisheva, “Determination of geometric characteristics of local wool by a standard method and an acoustic device,” Textile Problems, vol. 1, pp. 47–51, 2018.

F. Abella D, “Effect of the Shearing Date on Wool Growth on Native Pasture in Merino Sheep,” International Journal of Zoology and Animal Biology, vol. 3, no. 5, 2020, doi: 10.23880/izab-16000239.

M. L. Galaska, L. D. Sqrow, J. D. Wolf, and A. B. Morgan, “Flammability Characteristics of Animal Fibers: Single Breed Wools, Alpaca/Wool, and Llama/Wool Blends,” Fibers, vol. 7, no. 1, p. 3, Jan. 2019, doi: 10.3390/fib7010003.

A. Majumdar, A. Das, and P. Hatua, “Effects of fabric thickness and inter-yarn pore size on ultraviolet radiation protection by polyester woven fabrics,” Fibers and Polymers, vol. 16, no. 5, pp. 1163–1168, May 2015, doi: 10.1007/s12221-015-1163-x.

R. D. B. Fraser and D. A. D. Parry, “Macrofibrill assembly in trichocyte (haed-a) keratins,” 2003.

“Wool blog,” 2026. [Online]. Available: https://petitewool.ru/blog-petitewool/sherst

“Methods of studying the physical and mechanical properties of wool,” 2026. [Online]. Available: https://studbooks.net/1287660/agropromyshlennost/metody_izucheniya_fiziko_mehanicheskih_svoystv_toniny_dliny_prochnosti_shersti

Z. Liqin and W. Biao, “Reverse engineering system based on cross-sectional image measuring system,” in International Technology and Innovation Conference 2009 (ITIC 2009), IET, 2009, p. 66. doi: 10.1049/cp.2009.1444.

R. H. Burns, “Methods of Measuring Improvement of Judgment in Wool Diameter and Wool Shrinkage Estimation,” J. Anim. Sci., vol. 1929, no. 1, pp. 179–182, Jan. 1929, doi: 10.1093/ansci/1929.1.179.

“Classification and properties of wool,” 2026. [Online]. Available: https://valjanie.com/klassifikatsiya-i-svoistva-shersti

S. A. Hamraeva, E. T. Laysheva, and Z. F. Valiyeva, “Determination of geometric characteristics of local wool by standard method and acoustical instrument,” Textile Journal of Uzbekistan, vol. 1, no. 1, 2019.

V. I. Trukhachev and V. A. Moroz, Wool science: textbook. Stavropol: AGRUS, 2012.

N. K. Timoshenko and N. T. Razgonov, “Methods and problems of measuring wool fineness in domestic practice,” 2026.

K. E. Razumeev, E. L. Pashin, and A. F. Plekhanov, Classification and testing methods of domestic natural textile raw materials: a textbook. Odintsovo: ANO O VPO “Odintsovo Humanitarian Institute,” 2013.

Downloads

Published

2026-02-04

How to Cite

F, V. Z., & Sh. D, S. (2026). Methods for Determining Quality Characteristics Wool Fibers. Central Asian Journal of Innovations on Tourism Management and Finance, 7(1), 572–577. https://doi.org/10.51699/cajitmf.v7i1.1153

Issue

Vol. 7 No. 1 (2026): January

Section

Articles

License

Copyright (c) 2025 Valieva Z. F, Sa'dullayev Sh. D

Creative Commons License

This work is licensed under a Creative Commons Attribution 4.0 International License.

In submitting the manuscript to the Central Asian Journal of Innovations on Tourism Management and Finance, the authors certify that:

  • They are authorized by their co-authors to enter into these arrangements.
  • The work described has not been formally published before, except in the form of an abstract or as part of a published lecture, review, thesis, or overlay journal.
  • That it is not under consideration for publication elsewhere,
  • The publication has been approved by the author(s) and by responsible authorities – tacitly or explicitly – of the institutes where the work has been carried out.
  • They secure the right to reproduce any material that has already been published or copyrighted elsewhere.
  • They agree to the following license and copyright agreement.

License and Copyright Agreement

Authors who publish with Central Asian Journal of Innovations on Tourism Management and Finance agree to the following terms:

  1. Authors retain copyright and grant the Central Asian Journal of Innovations on Tourism Management and Finance right of first publication with the work simultaneously licensed under Creative Commons Attribution License (CC BY 4.0) that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
  2. Authors can enter into separate, additional contractual arrangements for the non-exclusive distribution of the Central Asian Journal of Innovations on Tourism Management and Finance published version of the work (e.g., post it to an institutional repository or edit it in a book), with an acknowledgment of its initial publication in this journal.
  3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) before and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work.